Marine Plywood

Everest Marine Grade Plywood

is made of well selected pieces of core and face veneers. These are bonded with Phenol Formaldehyde BWP grade resin under high temperature and pressure.

Further, the finished plywood is subjected to proper chemical treatment with water-soluble fixed type preservatives under vacuum pressure to ensure protection against wood destroying organism and to make the product - insects, borer, termites and fungi free. This specific stress relieving treatment is also given to check anti-warp properties of plywood, which make them dimensionally stable in both excessive wet and dry condition throughout its life.

Thickness & Sizes

Standard thicknesses and sizes available. Custom needs are also entertained as per the requirement of the consumer.

Application

Everest marine plywood is basically used for wood-working in ships and marine vessels. It is also used in bus and truck body, bathroom paneling, cooling towers, false ceilings etc.


Technical Specifications IS 710

  Marine Grade Plywood


 

S. no. Test I.S.I. Requirement Results
1. Moisture Content 5 - 15% 7.2%
2. Glue Shear Strength in Dry Condition a) Individual Min. 1078.7 N
b) Average Min. 1323.9 N
1450
1700 N
3. Glue Shear Strength after Wet Condition a) Individual Min. 784.5 N
b) Averge Min. 980.7 N
1250 N
1420 N
4. Glue Shear Strength in mycological test a) Individual Min. 784.5 N
b) Average Min. 980.7 N
1120 N
1300 N
5. Tensile Strength
    a. Parallel to grain direction
    b. Right angle to grain direction
    c. Sum of both directions
Min. 420 Kgf./cm2
Min. 250 Kgf./cm2
Min 845 Kgf./cm2
645 Kgf./cm2
395 Kgf./cm2
1040 Kgf./cm2